"high pressure centrifugal fan"

Ventilateur de dilution industriel pour le traitement des fumées et des gaz d'échappement. Supporte 330°C, 16150m³/h, 5500Pa. Lames incurvées vers l'arrière à haut rendement, matériaux/puissance personnalisables. Garantie 1 an.

Ventilateur d'appoint à économie d'énergie pour le traitement des fumées. Gère un volume d’air de 16 150 m³/h, une pression de 5 500 Pa à 330°C. Matériaux personnalisables (acier au carbone/304/316), tensions et tailles. Comprend des roulements SKF/FAG durables avec une garantie d'un an.

Dry Quenching Circulating Fan for Metallurgical Industry As the core power equipment of the Coke Dry Quenching (CDQ) plant, the circulating fan performs the critical task of driving the inert circulating gas (primarily nitrogen and carbon dioxide) within the closed-loop system to cool red-hot coke and recover its sensible heat. Operating under severe conditions, it must continuously withstand high temperatures (≤250°C), high dust concentrations (coke fines), and potentially

Electrolytic Aluminum Process Fans in the Metallurgical Industry This specialized fan series provides critical gas handling and transport for the entire electrolytic aluminum production process, covering raw material conveying, potroom gas capture and purification, process cooling, and auxiliary systems. Its core challenge lies in operating under extreme and complex conditions: high temperature, high corrosivity (containing hydrogen fluoride, pitch volatiles, etc.), high dust

Circulating Fans for Furnaces in the Metallurgical Industry This circulating fan is specifically designed for closed or semi-closed gas recirculation systems in various high-temperature furnaces (such as Electric Arc Furnaces, Ladle Furnaces, Heat Treatment Furnaces, Melting Furnaces) within the metallurgical industry. Its core function is to actively drive the forced circulation of high-temperature protective atmospheres (e.g., nitrogen, argon) or process gases within the

Gas Booster Fan for Metallurgical Industry Specifically designed for the capture and purification systems of primary converter gas and secondary fugitive dust, this fan is the core power equipment for ensuring ultra-low emissions and clean production in steelmaking plants. It must handle severe, shock-type load fluctuations within extremely short periods, caused by cyclical processes such as hot metal charging, blowing, and tapping. Its performance directly impacts the dust

Alloy Steel High Pressure Materials Drying Flue Gas Blower Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized

High-Temperature Fan for Flue Gas Treatment with Resistance to 1050°C When blowers operate at temperatures exceeding 350℃, the strength of most materials decreases significantly. However, for the special process requirements of cement plants, steel mills, aluminum plants, and chemical plants, blowers need to operate stably at temperatures between 350℃ and 950℃. This necessitates that the materials and structural design of the blowers possess high-temperature resistance.

Yellow Phosphorus Exhaust Fan for Chemical Industry Designed specifically for the harsh and corrosive conditions in yellow phosphorus production, this heavy-duty exhaust fan reliably handles toxic, high-temperature, and highly corrosive tail gases containing phosphorus, fluoride, sulfide, and particulate matter. Features Backward-curved blades for high efficiency and energy saving Not prone to scale buildup Explosion-proof construction Zero leakage design Integrated vibration